Where is the heater installed in the bathroom

It is recommended to install the bathroom heater as close to the middle corner of the bathroom as possible. It can be located above the toilet, in the shower or at the entrance and exit of the bathtub. It is important to reserve exhaust holes and keep them away from curtains and flammable materials. Maintenance holes should be set up to facilitate future maintenance and upkeep.
When installing a heater in the bathroom, the body must be at least 1.8 meters above the ground, and the height between the ceiling and floor cannot be less than 30 centimeters. The distance between the exhaust hole and the wall must be at least 20 centimeters or more.
What if the heater stops blowing hot air and only blows cold air
1. Capacitor or motor damage: When the capacitor and motor of the heater are damaged, the heater cannot function properly and needs to be repaired or replaced.
2. Circuit fault: When the heater is used for a long time, its circuit and plug are prone to aging and short circuiting. It is necessary to suspend the operation of the heater and wait for the temperature to cool down or replace the circuit and plug in a timely manner.
3. Blocked heater outlet: If the heater is left uncleaned for a long time, it may cause blockage in the heater outlet, and it is necessary to regularly clean the exhaust outlet of the heater.